Own it Now, Pay Later 
- Ninja V+ 5.2″ 8K HDMI Recording Monitor
- AtomX CAST HDMI Broadcast Switcher
- Accessory Kit with Batteries & Charger
- Screen Protector, Sun Hood, Travel Case
Add full broadcasting, monitoring, and recording kit to your camera rig with this Atomos Ninja V+ Switch & Stream Kit put together by Leederville Cameras. The kit includes the Ninja V+ 5.2″ 8K HDMI raw H.265 recording monitor, the AtomX CAST, and all the accessories you need, including a Master Caddy II, battery eliminator, power adapter, hard case, two batteries, sun hood, screen protector, and additional accessory plastic travel case.
The 5.2″ Ninja V+ on-camera monitor inputs up to 8K raw video from your camera and features SSD recording, HDMI input, L-series battery support, ProRes format and H.265 codec support, 1000 cd/m² brightness, anamorphic de-squeeze, and the optional AtomX SDI expansion module. The AtomX CAST features a built-in program monitor and allows you to output HDMI video directly for streaming to the internet and switching with other HDMI sources.
Read more below about the items in this kit.
Atomos Ninja V+ 5.2″ 8K HDMI H.265 Raw Recording Monitor
If you’re shooting with an 8K camera, then why not record in 8K raw format using the Ninja V+ 5.2″ 8K HDMI H.265 Raw Recording Monitor from Atomos. The Ninja V+ is the same on-camera monitor/recorder as its predecessor the Ninja V 5″, but the Ninja+ now features a 5.2″ display and records and plays back up to 8K raw video to and from purpose-built mini-SSDs.
The Ninja V+ can record Apple ProRes RAW up to 8K30 or DCI 4K120 directly from the sensor, and it is compatible with select cameras such as the Canon R5. It also includes an H.265 free-to-download license to record with the high-quality, low-bandwidth codec for up to 10-bit recording in ProRes 4:2:2. Display features include a 10-bit screen with a brightness of 1000 cd/m² AtomHDR technology for accurate monitoring of your log gamma footage, and support for popular log formats from Sony, ARRI, Canon, JVC, Panasonic, Nikon, RED, Sony, and Z CAM cameras.
Built to withstand the rigours of production, the Ninja V+ features an aluminium chassis and powers from a single L-series battery. Additional features include a variety of on-screen exposure analysis, framing, anamorphic de-squeeze, and focus assist tools. Separately available AtomX SDI, AtomX SYNC, Connect 4K modules, and an SDI Raw license key further expands your Ninja V+ capabilities. Firmware update 10.76 supports Apple ProRes RAW over HDMI with the Olympus OM-1 Micro Four Thirds camera.
Firmware Update 10.76
OM-1 ProRes Raw
New in the Ninja V+
XQ: Bit rates up to 350 Mb/s
MQ: Bit rates up to 200 Mb/s
LQ: Bit rates up to 100 Mb/s
5″ Daylight Viewable Screen
Recording Codecs Including Raw over HDMI
- Record Apple ProRes and ProRes RAW with select cameras at rates up to 8K30 with select cameras and up to DCI 4K120
- Enables ProRes RAW capture with smaller, more cost-effective, mirrorless cameras
- Avid DNx compatibility enables wide camera and editing software compatibility
Bright 5.2″ Display with AtomHDR
- Display ten+ stops of the dynamic range of your camera’s log image with AtomHDR
- 1920 x 1080 display with 1000 cd/m² brightness for daylight viewing
- 10-bit colour processing and user calibration
- Supports custom LUTs
DSLR and Mirrorless Camera Support
ARRI, Canon, FUJIFILM, Nikon, Panasonic, RED, Olympus, Sony, and Z-CAM
8K30 and 4K120 Capabilities
SSD Recording
User Calibration
Anamorphic De-Squeeze
Selectable Markers
Game Capture
Audio Input/Output
Optional Expansion Modules
- AtomX SDI Module for 12G-SDI input and output and HDMI/SDI cross conversion for up to 8K30 ProRes RAW video
- SDI Raw activation key
- AtomX SYNC for wirelessly synced, timecoded multicamera capture
- Atomos Connect 4K for HDMI to USB conversion for streaming up to 1080p60
- SDI Raw is now supported on Sony FS700, F5, and FS5 cameras as of firmware update 10.71
Supported Log Formats
- ARRI Log C
- Canon C-Log, C-Log 2
- FUJIFILM F-Log
- JVC J-Log
- Nikon N-Log
- Panasonic V-Log
- RED LogFilm
- Sony SLog2, SLog3
HDR Recording (Gamut)
- ARRI Log CEI160, CEI200, CEI250, CEI320,
- ARRI LogCEI400, CEI500, CEI640, CEI800
- ARRI LogCEI1000, CEI1280, CEI1600
- Canon C-Log, C-Log 2, C-Log3
- FUJIFILM F-Log
- HLG
- JVC J-Log1
- Nikon N-Log PQ10K
- Panasonic V-Log
- RED LogFilm, RG310, RG312
- Sony SLog2, SLog3
HDR Monitoring (Gamma)
- ARRI ALEXA Wide Gamut
- BT.2020
- Canon Cinema, DCI P3, DCI P3+, BT2020
- JVC LS300
- Nikon N-Log PQ10K
- Panasonic V-Gamut
- Rec. 709
- RED DRAGONcolor, DRAGONcolor2
- REDcolor2, REDcolor3, REDcolor4
- REDWideGamut
- Sony S-Gamut, S-Gamut3, S-Gamut3.Cine
- Sony SLog2, SLog3
HDR Monitoring (Gamut)
- ARRI ALEXA Wide Gamut (mapping to Rec. 709/BT.2020/DCI-P3 on loop-out)
- BT.2020
- Canon Cinema
- DCI-P3, DCI-P3+
- Panasonic V-Gamut
- Rec. 709
- RED DRAGONcolor, DRAGONcolor2
- REDcolor2, REDcolor3, REDcolor4
- REDWideGamut
- Sony S-Gamut, S-Gamut3, S-Gamut3.Cine
Time-Lapse
- Number of frames/seconds captured
- Intervals between frames/seconds/minutes/hours
- Duration of sequence in frames/seconds/minutes/hours
Monitor Leica L-Log Gamma in BT2020 Gamut
- Supports Leica SL 25 only
- Support for other models available in future updates
Atomos AtomX CAST for Ninja V/Ninja V+
Convert your Ninja V or Ninja V+ 5″ monitor into a full multi-camera broadcast studio switcher with the AtomX CAST from Atomos. The AtomX CAST takes its name from “broadcast”, and it allows you to switch up to four HDMI video sources and output it to a variety of destinations such as an external monitor, a recorder, a separate switcher, or to a live streaming computer. Applications include corporate, house of worship, event, family, or studio production environments.
The CAST is specially designed to mount onto the back of the Ninja V/V+ monitor, and it provides four HDMI inputs that support a mix of different resolutions up to 1080p60. The touchscreen monitor can view a single image, Picture-in-Picture, or 4-Up modes, and you can also add logos and graphic overlays. It can send Program, Preview, Picture-in-Picture, and 4-Up displays to the HDMI output. You can select the source for monitor/output using the four source buttons, and you can also select the source using the monitor touchscreen. There are also four programmable function buttons to perform specific shortcuts.
The monitor allows you to preview your broadcast while simultaneously outputting to a recorder, a monitor, a projector, or when using the optional AtomX Connect for live streaming using a computer. It also supports recording output to ProRes and Avid DNx formats. It is compatible with most streaming platforms such as Skype, Zoom, Teams, and more using UVC with the included USB Type-C cable. The CAST is powered using the power adapter included with your Ninja V/V+, and it passes the power onto the monitor through the battery mount.
Compatibility
4-Input Switcher
Mixed Feed Use
Overlays & Graphics
Atomos Connect Streaming
Multi viewing
HDMI Output
Stream, Record & Monitor
Buttons & Touchscreen
Applications
- Live to stream
- Simultaneously recording live events
- Multicamera productions
- Corporate events and meetings
- Music, awards, and performance events
- Weddings and family events
Atomos 5″ Accessory Kit for Shinobi, Shinobi SDI, Ninja V Monitors
Outfit your 5″ monitor with power options and travel accessories with this 5″ Accessory Kit from Atomos. It’s compatible with Ninja V, Shinobi, or Shinobi SDI monitors with two L-series batteries, a fast charger, a DC power supply, a sun hood, a screen protector, and a plastic travel case.
Reviews
There are no reviews yet.