NiSi S6 150mm Filter Holder Kit w/True Colour NC CPL for Sony FE 14mm f/1.8 GM

This S6 150mm Filter Holder from NiSi features two filter slots for the convenient use of up to two 150mm wide, 2mm thick square or rectangular filters. Each slot is designed to grip an installed filter only along the surface of the filter’s edges, so contact with a filter’s front or rear-facing surfaces is avoided. Positioning filters is particularly important when using 170mm-long graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot. The S6 system allows the filter holder to rotate, and it has a lock to hold it in position. The filter holder supports the use of a rotating circular CPL.

This is the same filter holder found in the NiSi S6 Filter Kit. It is the filter holder only and does not include the required S6 adapter rings.

The NiSi S6 150mm Filter Holder Adapter Ring is designed to enable the use of a NiSi S6 150mm Filter Holder System on a Sony FE 14mm f/1.8 GM lens. The use of the S6 filter holder is easily accomplished by first sliding the adapter ring over the integrated hood of a lens and tightening it. The adapter ring accommodates a NiSi S6 circular filter for NiSi S6 including a circular polariser and UV filter. When combined with the adapter ring, a compatible polarizer filter can be rotated to adjust its effect. Both the external dials on the adapter ring allow for the independent rotation of the circular polarizer. A NiSi S5 150mm Filter Holder can then be placed over the adapter ring. After being fitted onto the adapter ring, the filter holder’s pull-and-release locking pin helps to provide a reliable, yet adjustable connection that allows the filter holder to be rotated 360°, permitting the use of graduated neutral density and other filters that are enhanced by varied positioning. For durability, this adapter ring features an aluminium alloy construction. The adapter allows very quick installation and removal without removing the lens from the camera.

This NiSi Protection Lens Cap is designed to attach to a NiSi S5 or S6 150mm Filter Holder Kit’s adapter ring when the kit’s filter holder is removed. While in use, this lens cap can protect a NiSi S5/S6 circular polarizer filter installed on the adapter ring while the adapter ring remains on a lens.

This S6 150mm Filter Holder Pouch from NiSi provides secure and convenient transport and storage solution for a NiSi S6 150mm filter holder kit. The pouch’s main compartment accommodates the kit’s adapter ring together with its filter holder, and a separate pocket can be used to hold the kit’s polarizer filter or another separately available screw-in filter compatible with the adapter ring.

This durable and convenient filter pouch can be used to keep its contents protected and organized inside a larger bag or case. The rear of the pouch features a loop to allows it to be fastened to a camera bag or a tripod leg, putting the filter holder kit within more immediate reach. The interiors of this pouch’s main compartment include nonabrasive surfaces, and its exterior features a durable nylon construction. It has a hook-and-loop touch tab closure.