IDX V Lock 2x E-HL10DS Battery and 1x VL-2PLUS 2-Channel Sequential Quick Charger Kit

The ENDURA E-HL10DS 96Wh Li-Ion V-Mount High Load Battery from IDX can be used with all ENDURA V-mount chargers and accessories. With a 96Wh capacity, the E-HL10DS can handle a draw of 10A/120W. In addition, it comes equipped with one built-in D-Tap connector, which is capable of taking a 50W load to power ancillary accessories. The internal design of the battery pack cradles each cell securely to maximize safety. Weighing approximately 1.76 lb, it is suitable for high draw applications where weight matters.

• 96Wh capacity with the ability to handle high current draws of 10A/120W
• Designed to meet Japan’s PSE safety regulations for mechanical and electrical safety
• D-Tap DC output (unregulated) connector, which is capable of taking a 50W load within the maximum draw of 120W
• 4 power indicator LEDs that are located on the side for quick and accurate capacity readout
• Compact and durable; weighs only 1.76 lb and is suitable for high-power equipment where weight matters
• Battery circuit protection ensures that the E-HL10DS is fully protected against common causes of battery misuse, and provides protection against over charge, over discharge, and overcurrent
• Approved for carry-on airline baggage as per IATA regulations
• Fully compatible with all ENDURA V-Mount chargers and accessories
• Environment friendly and recyclable
• Manufactured in co-operation with Sanyo

The VL-2 is a two-channel, sequential Li-Ion (Lithium-Ion) fast charger with a built-in 60W power supply. Up to two Li-Ion Endura V-mount batteries can be charged in 5 hours.

Portability

The VL-2 offers a lightweight design (3.3lbs) with a convenient built-in handle.

V-Mount

The highly reliable V-Mount, battery mount is becoming more and more prevalent on many new broadcast and professional camcorders. In response, IDX has adapted the design of their batteries and chargers to with the V-Mount design.

Condition Indicator

An LED condition indicator is offers a quick glance of each batteries charge status.

Battery Chemistries

The optional A-E2NP allows the VL-2 to charge NP style batteries of any one of the following chemistries:

Li-Ion (Lithium Ion)

NiCd (Nickel Cadmium)

NiMH (Nickel Metal Hydride)

Power Supply

A standard 4-Pin Canon type connector is available on the front panel for 60 watts of DC power.

Red (charging)

Green (complete/trickle)

Orange (battery fault)

World-Wide AC Power

As with all IDX chargers, the VL-2's power switch is recessed to prevent an accidental loss of power. A world-wide, auto-sensing AC power (AC 100-240V) operation is standard.