Home » Shop » IDX V Lock 2x E-HL10DS Battery and 1x VL-2PLUS 2-Channel Sequential Quick Charger Kit

IDX V Lock 2x E-HL10DS Battery and 1x VL-2PLUS 2-Channel Sequential Quick Charger Kit

SKU: ID-BR-2BATT-KIT Categories: , ,


Own It Now, Pay Later | 6 Months interest free
Easy Payment With


Excludes print orders and bulky items


Found it cheaper? Enquire now for a price match deal


With over 30 Years experience In the photographic industry

IDX V Lock 2x E-HL10DS Battery and 1x VL-2PLUS 2-Channel Sequential Quick Charger Kit

The ENDURA E-HL10DS 96Wh Li-Ion V-Mount High Load Battery from IDX can be used with all ENDURA V-mount chargers and accessories. With a 96Wh capacity, the E-HL10DS can handle a draw of 10A/120W. In addition, it comes equipped with one built-in D-Tap connector, which is capable of taking a 50W load to power ancillary accessories. The internal design of the battery pack cradles each cell securely to maximize safety. Weighing approximately 1.76 lb, it is suitable for high draw applications where weight matters.

  • 96Wh capacity with the ability to handle high current draws of 10A/120W
  • Designed to meet Japan’s PSE safety regulations for mechanical and electrical safety
  • D-Tap DC output (unregulated) connector, which is capable of taking a 50W load within the maximum draw of 120W
  • 4 power indicator LEDs that are located on the side for quick and accurate capacity readout
  • Compact and durable; weighs only 1.76 lb and is suitable for high-power equipment where weight matters
  • Battery circuit protection ensures that the E-HL10DS is fully protected against common causes of battery misuse, and provides protection against over charge, over discharge, and overcurrent
  • Approved for carry-on airline baggage as per IATA regulations
  • Fully compatible with all ENDURA V-Mount chargers and accessories
  • Environment friendly and recyclable
  • Manufactured in co-operation with Sanyo

The VL-2 is a two-channel, sequential Li-Ion (Lithium-Ion) fast charger with a built-in 60W power supply. Up to two Li-Ion Endura V-mount batteries can be charged in 5 hours.

The VL-2 offers a lightweight design (3.3lbs) with a convenient built-in handle.
The highly reliable V-Mount, battery mount is becoming more and more prevalent on many new broadcast and professional camcorders. In response, IDX has adapted the design of their batteries and chargers to with the V-Mount design.
Condition Indicator
An LED condition indicator is offers a quick glance of each batteries charge status.
Battery Chemistries
The optional A-E2NP allows the VL-2 to charge NP style batteries of any one of the following chemistries:

  • Li-Ion (Lithium Ion)
  • NiCd (Nickel Cadmium)
  • NiMH (Nickel Metal Hydride)
  • Power Supply
    A standard 4-Pin Canon type connector is available on the front panel for 60 watts of DC power.

  • Red (charging)
  • Green (complete/trickle)
  • Orange (battery fault)
  • World-Wide AC Power
    As with all IDX chargers, the VL-2's power switch is recessed to prevent an accidental loss of power. A world-wide, auto-sensing AC power (AC 100-240V) operation is standard.


    There are no reviews yet.

    Be the first to review “IDX V Lock 2x E-HL10DS Battery and 1x VL-2PLUS 2-Channel Sequential Quick Charger Kit”


    Power Supply


    Battery Bays


    Type of Charging





    Endura V-Mount (x 2)
    4-Pin XLR (x 1)

    Power Requirements

    100-240 Volts AC, 50 or 60 Hz

    Dimensions (WxHxD)

    5.94 x 3.1 x 8.34 inches
    151 x 79 x 212 mm


    2 lbs.


    Compatible With

    All ENDURA V-mount chargers and accessories

    Battery Capacity

    96 Wh (14.4 V, 6.6 A)

    Maximum Output Voltage

    16.8 VDC

    Nominal Voltage

    14.4 VDC

    Maximum Discharge Current

    10 A/120 W

    End Voltage

    12 V

    Battery Protection

    Over charge, over discharge, overcurrent

    Ambient Temperature

    To Charge: 32 to 104°F (0 to 40°C); 50 to 86°F (10 to 30°C) recommended

    To Discharge: -4 to 113°F (-20 to 45°C); 50 to 104°F (10 to 40°C) recommended

    Storage: 32 to 104°F (0 to 40°C)

    Dimensions (W x H x D)

    3.8 x 5.8 x 2.3″ (9.7 x 14.6 x 5.8 cm)


    1.76 lb (0.79 kg) approximately

    • 2x IDX V Lock E-HL10DS Battery
    • 1x VL-2PLUS 2-Channel Sequential Quick Charger
    • Warranty

    Shopping Cart