Own it Now, Pay Later 
- Softens and Diffuses Light
- Collapsible Design for Fast Setup
- Removable Inner Baffle & Front Diffuser
- Cerberus Multi Mount Holder
- For most Shoe-Mounted Flash Units
- Clamps Down to Flash Head
- Leaves Hot Shoe Accessible
- Varos Pro BG Umbrella Holder
- 5/8″ Stand Mount
- Carrying Bag Included
Get the soft light you want from your shoe-mounted flash with this 24 x 24″ Transfolder Softbox with Cerberus Multi Mount Holder Kit from Phottix. The Transfolder softbox features a collapsible design that is rod-free, allowing for quick and easy setup without the hassle of traditional softboxes. This kit then features the Cerberus Multi Mount Holder which will function as a speed ring for the softbox and allow users to use a shoe-mounted flash. Additionally, it comes with the Varos Pro BG umbrella holder to provide tilt control and a standard 5/8″ stand mount.
Quickly and easily get soft, diffused light from your flashes and studio strobes with the 24 x 24″ Transfolder Softbox from Phottix. Featuring a collapsible design, this softbox is easy to set up and take down, eliminating a lot of the hassle of traditional softboxes. It also features a removable front diffuser and inner baffle for more control over the quality of light. And, it comes with a carrying bag and works with a variety of Phottix speed rings.
By positioning your flash head in the center of your light shaper, the Cerberus Multi Mount Holder from Phottix ensures optimal light dispersal. This mount works directly with Easy-Folder Light Shapers, though optional speed rings are available so you can use your own modifiers. It also incorporates the Griffin Universal Flash Mount, which securely clamps down onto the head of most shoe-mounted units, alleviating stress on the shoe and allowing for the use of shoe-mounted triggering systems. Additionally, the system features a 1/4″-20 thread as well as a 5/8″ stud with a 3/8″-16 thread for mounting.
The Varos Pro BG Multi-Function Flash Shoe Umbrella Holder from Phottix is 300% stronger than previous versions and features an aluminum alloy body with a metal cold shoe as well as a 3/8″ and 1/4″ female threaded insert and a male insert with 3/8″ and 1/4″ screws. The holder’s teardrop-shaped umbrella mount accepts shafts from 7 to 10 mm in diameter and is slanted 8 degrees to allow more light to hit the center of the umbrella. Its patented 180-degree tilting mechanism will support up to 66 lb (30 kg). The Varos Pro BG has a hanging hole with a clip for use with a counterweight or other accessory.
- Aluminum alloy body with a metal cold shoe
- 3/8″ and 1/4″ female threaded insert and 3/8″ and 1/4″ male screws insert
- Teardrop-shaped umbrella mount which accepts umbrellas with 7-10 mm shafts
- 8-degree slanted umbrella mount that allows more light to hit the center of the umbrella.
- Redesigned patented locking mechanism to hold the top screw and bottom 3/8″ and 1/4″ female threaded insert securely with 300% more locking force while keeping the umbrella shaft more secure and damage free
- Patented 180-degree tilting mechanism that will support up to 66 lb (30 kg)
- Locking features to hold bottom lugs secure until the locking button is released
- Hanging hole with clip for use with a counterweight or other accessory
Reviews
There are no reviews yet.